Injection mortar FIS P Plus

Home /Fixing systems

Injection mortar FIS P Plus


  • With FIS P Plus, anchorings in masonry for which approval is relevant can be realised in a particularly economical manner.
  • FIS P Plus 300 T can be used with stable, standard silicone injection dispensers. No special equipment is required. As a result, procurement costs can be reduced on the basis of polyester resin.


  • FIS P Plus is a 2-component injection mortar based on polyester resin.
  • Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
  • Partially used cartridges can be reused, simply by changing the static mixer.
  • Related accessories for use in masonry can be found on page.